TASKLED - Smart LED drivers
hipCC Version 1.1A driver board
High Current Buck converter.
home > products (hipCC)
Discontinued Product, use h6CC instead
hipCC Driver:
- Buck converter, typical configurations 80 to 95% efficient (see tech section).
- Constant current regulator. 2.8A current limit.
- Can drive up to 5 series connected Seoul P7 or Cree MC-E (Vf < 4V each)
- Operates from 7V to 24V (***See technical section for clarification of the lower voltage range). 4 li-ion cells MAX.
- Maximum output voltage 24V (same as Vin).
- Protected against reverse polarity connection (low voltage drop FET) and
output short circuit.
- Regulator requires about 0.5V over the total LED Vf to
maintain regulation, current drops when out of regulation.
- Board is 1.10" in diameter. Maximum thickness (board and inductor height) is 8.9mm or 0.35".
- Single sided components. 2 screw holes to clamp the driver to a heatsink using supplied thermal pad material.
- PWM input that is compatible with d2Flex V1.1 or V2.0
home | products | technical | installation |history | order products | contact
©2012 TaskLED. All Rights Reserved.
